Joubert Industry
Joubert Aludoor
Okoume throughout
- Okoume throughout with 2 sheets of aluminium
- Faces II/II
- Available in an 80-micron acrylic version pre-painted on both faces
- Available in a version that is 280 gr/m² white filmed on both faces (to be painted)
The technical panel for doors
Joubert Aludoor is a clever combination of Okoume and aluminium sheets. It is a technical panel specially designed for making doors and for industrial joinery. It is very resistant, does not bend, does not distort and can be used outdoors. It is of a quality for grooving and is available in raw, pre-painted and filmed versions.
Applications
Applications | Joubert Aludoor Okoume throughout |
---|---|
Entrance doors | ★ ★ ★ |
Standard thicknesses and sizes
Thicknesses |
---|
40 mm |
54 mm |
Sizes |
---|
215 x 95 cm |
235 x 105 cm |
235 x 95 cm |
250 x 122 cm |
Description
- The Joubert Aludoor panel is intended for making doors. The aluminium sheet serves as a moisture barrier, provides better stability and prevents excessive distortion of the panel. Panel of a quality for grooving.
Gluing
- Exterior gluing Class 3 - E1
Standards
- Classification of faces in accordance with the standard, EN 635-2
- Gluing in accordance with the standard, EN 314-2
- The marking of the panel will be done on the first quality face veneer
Other
- For FSC®-certified panels, depending on availability, contact us.
- Particular attention must be given in achieving perfect watertightness for the edges of plywood panels used in exterior surroundings.